What We Do

FDS-32 10X38 32A Fuse Link&Fuse Holder
FDS-32 10X38 32A Fuse Link&Fuse Holder

FDS-32 dc fuse link A range of 10x38mm fuse links specifically designed for protecting photovoltaic strings. These fuse links are capable of interrupting low overcurrents associated with faulted photovoltaic string arrays (reverse current, multi-array fault).

FPV-63 DC MCB
FPV-63 DC MCB

FPV-63 DC MCB supplementary protectors are designed to provide overcurrent protection within appliances or electrical equipment, where a branch circuit protection is already protection or not required. Devices are designed for direct current (DC) control circuit applications.

FSP-D40 DC SPD
FSP-D40 DC SPD

FSP-D40 DC SPD Surge protective device, protect against lightning surge voltages in solar system (photovoltaic power supply system). These units must be installed in parallel on the dc networks to be protected and provide common and different modes protection. Its installed location are recommended at both ends of the dc power supply line (solar panel side and inverter/converter side), especially if the line routing is external and long. High energy MOVs equipped with specific thermal disconnectors and related failure indicators.

FDIS DC Waterproof Isolator Switch
FDIS DC Waterproof Isolator Switch

1.Compact and suitable were space is limited 2.DIN rail mounting for easy installation 3.Load-breaking up to 8 times rated current making it ideal for motor isolation

FSP-A AC SPD
FSP-A AC SPD

FSP-A AC SPD series surge protection device (in short SPD,alias:surge suppressor surge arrester)is suitable for TN-S, TN-C-S, TT, IT etc, power supply system of AC 50/60Hz,<380V, installed on the joint of LPZ1 or LPZ2 and LPZ3. It's designed according to IEC61643-1, GB18802.1, it adopts 35mm standard rail, there is a failure release mounted on the module of surge protection device, When the SPD fails in breakdown for over heat and over-current, the failure rlease will help electric equipments separate from the power supply system and give the indication signal, green means normal, red means abnormal, it also could be replaced for the module when has operating voltage.

FMC4 Solar Connector
FMC4 Solar Connector

1.Simple on-site processing. 2.Accommodating PV cable with different insulation diameters. 3.Mating safety provided by keyed housings.

If you are interested to be our agent in your market, we will be your strong backup.

Project

Lots of successful projects are not published on website

who we served

Lots of successful projects are not published on website